Горячекатаный лист/рулон (1, 5-8мм)

ALIBABA GROUP (CIS) paves direct access to Eurasian productions of commercial or thin Steel Sheets & Coils, hot-rolled in relative variety of grades and dimensions. Thickness to be within 1.5-8.0mm, width within 1, 000-1, 500mm, length within 2, 000-12, 000mm or else length in coils specified by buyers. Common and specific characteristics include 1) plates and sheets of ordinary carbon steel for general purposes; 2) plates of quality carbon steel for general purposes; 3) plates of high quality structural steel for cold stamping; 4) plates with increased strength; 5) sheets of structural low-alloyed steel; 6) sheets and wide strips of structural quality steel.
Manufactured according to domestic and partially international standards as following:
-- ST0-6 SP
-- ST0-6, 10 KP(PS)
-- 07-08 GYUT
-- 08-20 KP(PS), 25PS
-- 09G2, 09G2D, 09G2С
-- S235JR, S235JRG1, S235JRG2, S275JR
Regulated by general State Standards DSTU 2834-94 (including GOST 4041-71, GOST 19903-74, GOST 17066-80, GOST 14637-89, GOST 19281-89, GOST 1577-93, GOST 16523-97) and specific Technical Conditions TU U 14-4-426-98, TU U 14-4-458-99, TU U 14-16-56-2000, TU U 27.1-4-516-2002, TU U 27.1-00193714-182-2004, TU U 27.1-23365425-621:2007; and rolled into groups of dimensions preceding from thickness/width variation:
1.5х970-1030mm; length 2000-6000(12000)mm
1.8х970-1100mm; length 2000-6000(12000)mm
1.9х1000-1250mm; length 2000-6000(12000)mm
2.0-2.5х1000-1250mm; length 2000-6000(12000)mm
2.6-2.9х1000-1360mm; length 2000-6000(12000)mm
3.0-3.9х1000-1500mm; length 2000-6000(12000)mm
4.0-6.0х1000-1500mm; length 2000-6000(12000)mm
6.1-8.0х1000-1500mm; length 2000-6000(12000)mm
Minimal order quantity is 1, 000mt because this is minimal capacity of a single blast furnace where requested steel grade for requested Steel Sheet or Coil is to be smelted. It is often delivered in 20ft/40ft containers, since bulk vessels don’t always have decks good for placing bundles of Flat Steel. Please note, any original production of HR Sheets/Coils is factory approvable but not publicly accessible process. True inquiry for particular production/offer/price has to show authentic information: 1) who (what company) is buyer/importer/consignee; 2) where (what bank) his payment is to come from; 3) how (in copies of docs) he bought/imported/consumed HR Steel last time, to prove 1) and 2).
ЕАSОN СНЕN – Senior Business Consultant
RUSSIA/BELARUS/UKRAINE/KAZAKHSTAN
ALIBABAGROUPCIS(AT)GMAIL(DOT)COM
+8657186688588; +86157158Ч788З